|
Watching eyeflys Video about his 2.5" Sting frame and having DutchCommandos 1S 18650 nano cruiser video in mind i decided to mix up both of them with a bit of my own spice.
Motors and Props from DutchCommando seemed to work fine for 1SLiIon for cruising and 2SLipo for Fun.
I slightly modified eyeflys Sting frame to fit a whoop-style controller and a smaller cam. I added a printed holder for a 18650 Cell inside the frame that features an additional XT30 connector for the 2S Lipo.
Modified this one to run on 2S Only but carying a naked Caddx Vista Nebula Nano v2. Added some Ducts for indoor use.
Use Custom Betaflight for BF warnings on DJI OSD
# diff all # version # Betaflight / STM32F411 (S411) 4.2.8 Mar 19 2021 / 21:01:25 (norevision) MSP API: 1.43 # config: manufacturer_id: MTKS, board_name: MATEKF411, version: be0c9205, date: 2020-01-15T19:44:32Z # start the command batch batch start # reset configuration to default settings defaults nosave board_name MATEKF411 manufacturer_id MTKS mcu_id 002b00523235511832333634 signature # name: dragonfrog # resources resource SERVO 1 A00 resource LED_STRIP 1 NONE resource SERIAL_TX 11 A08 resource SERIAL_RX 11 A08 # serial serial 0 1 115200 57600 0 115200 serial 1 64 115200 57600 0 115200 serial 30 2 115200 57600 0 115200 # aux aux 0 0 0 1700 2100 0 0 aux 1 1 1 900 1300 0 0 aux 2 2 1 1300 1700 0 0 aux 3 13 3 1700 2100 0 0 # master set acc_calibration = 42,-22,31,1 set rssi_channel = 16 set serialrx_provider = CRSF set failsafe_switch_mode = STAGE2 set bat_capacity = 850 set vbat_scale = 112 set ibata_scale = 309 set gps_auto_config = OFF set gps_rescue_min_sats = 5 set gps_rescue_allow_arming_without_fix = ON set report_cell_voltage = ON set osd_warn_rssi = ON set osd_warn_dji = ON set osd_cap_alarm = 800 set osd_vbat_pos = 2419 set osd_rssi_pos = 2197 set osd_link_quality_pos = 121 set osd_rssi_dbm_pos = 89 set osd_tim_2_pos = 407 set osd_flymode_pos = 2183 set osd_vtx_channel_pos = 65 set osd_crosshairs_pos = 2286 set osd_current_pos = 2374 set osd_mah_drawn_pos = 2406 set osd_craft_name_pos = 2224 set osd_warnings_pos = 14794 set osd_avg_cell_voltage_pos = 2387 set osd_stat_max_spd = OFF set osd_stat_bbox = OFF set osd_stat_bb_no = OFF set gyro_1_align_yaw = 1800 set name = dragonfrog profile 0 profile 1 profile 2 # restore original profile selection profile 0 rateprofile 0 rateprofile 1 rateprofile 2 rateprofile 3 rateprofile 4 rateprofile 5 # restore original rateprofile selection rateprofile 0 # save configuration save