modellbau:planes:garden_racing
created: 2016/06 mod:2017/04
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
| modellbau:planes:garden_racing [2016/12/06] – hermenj | modellbau:planes:garden_racing [2019/08/23] (aktuell) – Externe Bearbeitung 127.0.0.1 | ||
|---|---|---|---|
| Zeile 73: | Zeile 73: | ||
| < | < | ||
| * Based on: [[bg> | * Based on: [[bg> | ||
| - | * Motor Dist.: | + | * Motor Dist.: |
| * Motor Dist. Diag: 85mm | * Motor Dist. Diag: 85mm | ||
| * Weight: 25g with H8 Mini Battery | * Weight: 25g with H8 Mini Battery | ||
| Zeile 126: | Zeile 126: | ||
| * Battery: H8 stock 150mAh or [[bg> | * Battery: H8 stock 150mAh or [[bg> | ||
| * Frame: H8 stock | * Frame: H8 stock | ||
| - | * FPV: [[bg> | + | * FPV: <del>[[bg> |
| * FlightTime: ~3.5min with stock bat. | * FlightTime: ~3.5min with stock bat. | ||
| * Monitor: | * Monitor: | ||
| Zeile 135: | Zeile 135: | ||
| First impressions of the new Eachine EF-01 AIO Cam were not too good. nearly 3g heavier than the FX797T and lots of noise and lines in the image when motors spin. | First impressions of the new Eachine EF-01 AIO Cam were not too good. nearly 3g heavier than the FX797T and lots of noise and lines in the image when motors spin. | ||
| - | H8 can handle the weight quite well and after adding a capacitor in parallel with the cams power most of the noise is gone. | + | H8 can handle the weight quite well and after adding a capacitor in parallel with the cams power most of the noise is gone. First Conclusion: Stock H8 + cheap Eachine EF-01 Cam and small mod makes a nice and cheap Starter Kit! If you can efford the better FX797T cam, consider buying that one. |
| - | + | ||
| - | **First Conclusion: Stock H8 + cheap Eachine EF-01 Cam and small mod makes a nice and cheap Starter Kit!** If you can efford the better FX797T cam, consider buying that one. | + | |
| 2nd Conclusion: After getting a 2nd one of the Eachine EF-01 Cams, i mentiones that the PCD design of the cams has changed. The newer one does not have the metal shielding between the two PCBs and bigger capacitors on the power regulation which result in less image noise. Additionally the newer one is 0.7g less in weight. This makes the cam even better for the H8. Modded the stock H8 with a firmware flashing connector and removed a part of the top-case to fit the cam a bit better. Pretty happy with it now. Flies nice and gives 3:20min of FPV-Fun | 2nd Conclusion: After getting a 2nd one of the Eachine EF-01 Cams, i mentiones that the PCD design of the cams has changed. The newer one does not have the metal shielding between the two PCBs and bigger capacitors on the power regulation which result in less image noise. Additionally the newer one is 0.7g less in weight. This makes the cam even better for the H8. Modded the stock H8 with a firmware flashing connector and removed a part of the top-case to fit the cam a bit better. Pretty happy with it now. Flies nice and gives 3:20min of FPV-Fun | ||
| + | |||
| + | Bottomline: Better use the new [[bg> | ||
| + | |||
| ---- | ---- | ||
| Zeile 156: | Zeile 157: | ||
| * Module Code for Graupner/ | * Module Code for Graupner/ | ||
| - | For those who don't want to solder - but who wants to do that at this price... | + | **BUY THE NEW MODULE! - For those who don't want to solder - but who wants to do that at this price...** |
| * [[bg> | * [[bg> | ||
| </ | </ | ||
| Zeile 184: | Zeile 185: | ||
| ===== Videos: ===== | ===== Videos: ===== | ||
| + | |||
| + | H8 Brushed und X115 Brushless | ||
| + | {{youtube> | ||
| FPV Splittscreen - testing the start-lights. | FPV Splittscreen - testing the start-lights. | ||
Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)
No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)
modellbau/planes/garden_racing.1481030778.txt.gz · Zuletzt geändert: 2019/08/23 (Externe Bearbeitung)
Seiten-Werkzeuge
Falls nicht anders bezeichnet, ist der Inhalt dieses Wikis unter der folgenden Lizenz veröffentlicht: CC Attribution-Noncommercial-Share Alike 4.0 International
